What Are Pliers Used?
The pliers are a multi-purpose hand tool with opposing grips to hold, bend and bite the jaw. The two cross metal parts provide hard levitation to multiply the user’s hand strength. Pliers are an essentials part of every toolbox, as they have many uses for the home.
While you can usually get it with all-purpose pliers, there are other varieties of equipment that accomplish a specific task. Choosing the right plier for the rights job will improve efficiency.
#1. Entertaining
The primary uses of pliers are for gripping. You can put them to work on loosening or tightening bolts, holding objects for stabilization, or removing pins, nails, or other fasteners.
The standard utility pliers, formally called slip-joint pliers, have relatively flat jaws with teeth to hold small objects, as well as around, jagged opening to hold larger objects such as bolt heads and nuts.
It happens. Many also have a small scissors-like section for wire cutting. Tongue-and-groove pliers operate on the same principle as utility pliers but have longer handles & offset, or angled, jaws for greater leverage. The jaws are highly adjustable & can open wide for gripping pipes and large nuts.
#2. Bend / Straighten
Pliers can also be used to bend or straighten. The cross braces of the pliers allow superior torque strength to bend and bend objects such as sheet metal, nails, and wires. All pliers can help in turning things, so the type you choose will largely depend on the specific item you need to bend.
Long-nosed or needle-nosed pliers help you catch small objects that may be difficult to reach. Linesman pliers are commonly used by electricians to bend wire and cable.
#3. Cutting
Some pliers are also capable of cutting wire and nails. Diagonal-cutting and side-cutting pliers, commonly called wire cutters, are designed primarily for cutting and separating wires.
In most cases, their jaw structure makes wire cutters less suitable for holding larger objects such as bolts. However, because they are effective in catching and removing nails, they are still considered pliers.
#4. Splicing Wire/Stripping Insulation
Electricians use a variety of special pliers to connect wires and separate insulation. For this task, linesman pliers are a popular choice.
With wire cutting facilities, you can cut through the insulation of an electrical cable and close a small section to expose bare wire. If you do the same with another electrical cable, you can use pliers to help connect or split the two wires together.
Types of Pliers:
There are only a few types of pliers, but they all have an important function. In some cases, the types may be different to complete a specific task.
34 differents types of pliers are as follows.
1. Crimping Pliers
Hand tools are part of every toolbox. With special features for safety, durability, reliability, and vitality, Gardner Bender Hand Tools provide superior performance on every job.
Whether you need cutters, crimpers, strippers, and pliers – Gardner Bender has the perfect tool to complete your electrical toolset. These pliers are a superior multi-use device with a built-in crimper for making wire connections. They easily cut solid/stranded copper cores and aluminum core cords.
The built-in crimper is designed to contain non-insulated, vinyl, and nylon insulated, as well as ignition terminals. With a wide range of excellent features, it is an essential Pliers for every toolbox. Forward-thinking design concepts ensure product usability for generations to come.
- Cut copper and aluminum wire.
- Forged carbon steel construction for durability and robustness.
- Comfortable high-leverage handle design.
- Ability to accommodate both insulated and non-insulated power wire terminals.
- A thin nose allows cutting in tight places.
2. Round Nose Pliers
Round nose pliers are special-purpose pliers for the precise bending of wire. The small tapping jaw of the pliers has a perfectly round cross-section and can be used to make smooth turns in the wire with a controllable bending radius.
Round nose pliers are superior to other types in wire bending applications where bending accuracy or appearance requirements are particularly high, such as jewelry, decoration, and fine mechanics.
Not to be confused with the same bail pliers, the round jaws on these pliers are a bit thin and come together to form a triangular jaw design. They are used to make loops in jewelry, especially garlands and similar projects. Some also have insulated handles for use in electrical work.
3. Running Pliers
Stained glass is used in making crafts; these pliers make a clean break with lines made in glass. The wide-end jaws can be adjusted to match the thickness of your glass, and most have a centerline to ensure proper alignment when moving with the score.
4. Sheet Metal Pliers
The wide, rectangular jaws of these pliers are used to bend sheet metal and form seams. They are commonly found in metal shops & other industries where sheet metals are used. These are sometimes versions of locking players designed specifically for metalwork.
5. Split Ring Pliers
Resembling a stubby version of a needle nose or chain nose pliers, the split ring pliers have a tilted tip on the lower jaw. This tip acts as a wedge, separating the coiled rings. Split rings are commonly used in the manufacture of fishing tackle and keyrings.
6. Soft Jaw Pliers
Used for plumbing & scuba diving equipment, soft joe pliers can include many common types of pliers. The differences are that these pliers have padded jaws to prevents scratches on chrome & other soft metals or exposed surfaces.
7. Spark Plug Pliers
The narrow jaws of these pliers are either tipped with insulated tongs or a cylindrical holder. As the name suggests, the tips hold the spark plugs by boot or plug wires, assisting in automotive repair.
8. Welding Pliers
The jaw combinations of the welding pliers are similar to those of the pliers, with the same tip as the jaw of the needle-nose pliers.
The device performs a variety of tasks, including spatter removal, wire grasping, cutting, and even hammering. As the name itself suggests, these pliers are used extensively in welding-based trades.
9. Wire Twisting Pliers
This unusual tool has small jaws along the cutting edge by the fulcrum. There is a cylindrical locking mechanism and threaded knob between the handles.
By locking pieces of wire into the jaws & pulling it back on the knob, the entire device rotates, rotating the wire with it. These pliers, commonly used in jewelry making, are also often used by electricians.
Although primarily used in motor racing, the use of safety wire to secure components also has many applications in high-performance and classic road cars.
A lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibrations as well as other forces. Safety wiring also serves as a visual indicator that the fasteners have been tightened properly.
Typically, wire is threaded through a hole, drillers into fasteners or parts then rolled over and re-routed to another fastener or part.
This is particularly useful for critical areas such as suspension and brakes but is also very useful for securing other components, such as exhaust manifold bolts or remote oil filter mounting bolts from loosening.
10. Diagonal Pliers
The edge of the diagonal pliers can be used to cut the rubber or plastic insulation layer of the flexible wire. Pliers blades can also be used to cut wires and strings.
When cutting the No. 8 galvanized iron wire, use the blades to cut back & forth a few times around the surface and then pull it back a bit, and the wire will break.
It can also be used’s to cut hard metal wires such as electrical wires and steel wires. Electricians usually use various specifications such as 150.185.200 and 250mm. It can be purchased according to the needs of the line inside or outside.
Pliers’ teeth can also be used to tighten or loosen the nut. Slanted pliers are one of the smaller hardware tools, also known as “slanted nose pliers.” It has the most comprehensive function and is an indispensable tool in daily life and work.
11. Hose Clamp Pliers
Loosening the hose clamp To tighten the hose clamp, in the same way, you simply reverse and rotate the hose clamp screw clockwise. As you know, clockwise is turning something to the right, counterclockwise turning something to the left: spring clamp pliers, Hose pliers, radiator hose pliers.
These pliers are designed to compress the hose and spring clamp, making the connection tight. The most common model has a peg-shaped tooth on each jaw, which is used to pinch the clamp. Some models can also be used directly on the hose.
12. Needle Nose Pliers
A set of needle-nose pliers is an essential tool for any task that involves bending, shaping, and cutting wire.
They have distinctiveness features that differentiate them from other types of pliers: They are equipped with curved handles that provide both comfort & control, while a smart, spring-action design helps reduce hand fatigue.
With its signature feature-needle-nose-tip-toothed teeth, you can extend the reach of your hand to hard-to-reach positions for more precise work.
Some long-reach varieties (13 inches in length) have a dual-spindle design that opens the jaws in tight spaces compared to regular single-axle long-reach pliers.
The nose of this device is elongated for greater accuracy and has a cutting edge nears the base. Highly versatile tools; can be used for shaping, bending, & cutting wire.
13. Slip Joint Pliers
Slip joint pliers are constructed from premium materials for optimum application to achieve the best fit and specifications for reliability.
Mark of Professional Tools is a reputed organization concerned with the manufacture and supply of slip joint pliers and other related products.
We have established strong customers relationship by providing innovative, user-friendly, & high-quality products that are built into our sound infrastructure.
Being a reputed manufacturer & exporter in the industry, The Mark of Professional Tools will focus more on the quality and innovation of slip joint pliers and provide impeccable service and reasonable prices for customers.
When the jaws are open, the bolt of the fulcrum has a variety of marks to slip into, allowing you to lock to a specific width. They are often used for plumbing applications & can perform many duties—similar to wrench.
14. Snap Ring Pliers
The Mark of Professional Tools Retaining Ring is a leading provider of pliers and performance products and is recognized throughout the tool industries for its superior selection, superior customer care, and rapid delivery.
We are committed to offerings you the best-retaining ring pliers at the best prices while providing exceptional customer service.
We have extensive experience in developing and providing high-grade pliers for many industries. Please do not hesitate to contact us if you are interested in our retaining ring pliers after referencing our homepage.
We are also known as Retaining Ring Pliers, Circle Pliers, Sea Clip Pliers, and Lock Ring Pliers. These pliers have small, round jaws to help close the snap ring.
These rings are open-ended loops that fit into the grooves of a dowel or other round object. Once closed, the ring can rotate freely but is unable to slide sideways. They are commonly used for gear on mountain bikes and similar vehicles.
15. Hilmer Tongue and Groove Pliers
Hilmor quick-adjusting tongue and groove pliers come in 8 “, 10”, and 12 “sizes. A push-button and twice as many grooves as traditional tongue-and-groove pliers allow for quick and precise positioning.
V-shaped jaw makes it easier to hold hex, square, or round fasteners, while over-molded handles add comfort and reduce hand fatigue.
These are adjustable-type pliers with a jagged groove with an upper handle, allowing the lower jaw to be closed in multiple positions.
Angled jaws make these tools useful for turning nuts & bolts. The popular company Chanelock officially changed its name in 1963 to match the tool, which has been their most well-known product line since the company was trademarked in 1949.
16. Pliers
The pliers are hand tools used to hold objects firmly, possibly developed from the tongs used to handle hot metals in Bronze Age Europe, to bend and compress a wide range of materials.
Are also useful for Typically, the pliers have first-class metal levers that join a fulcrum located close to one end of the lever, forming short jaws on one side of the fulcrum and longer handles on the other side.
This arrangement produces a mechanical advantage, which can increase the force of the grip of the hand and focus on an object with precision.
Jaws can also be used to manipulate objects that are too small or cumbersome to manipulate with fingers. Many types of pliers are made for various general and specific purposes.
While previous pliers are all commonly found in tool kits, there are many more specific pliers that you mays Nevers encounters outside of their respective trades.
17. Grommet Pliers
Similar to the look and function of eyelet pliers, grommet pliers are used to make holes in tarps & other materials, as well as pasting grommets. Grommets are more heavy-duty than eyelets, making this device perfect for crafts with strong materials such as tents.
18. Hose Grip Pliers
These special pliers are designed to easily carry small hoses in or out of tight spaces. Their grabber jaws are shaped to prevent damage to hoses such as vacuum lines, heater hoses, and fuel lines.
Just hold the hose and turn or turn. Hose grip pliers also work great for hose clamps, spark plugs, and various other small components.
19. Linesman Pliers
Although the name may not sound familiar, chances are you may have seen or used them at some point. Easily identified by the jaws, which have a small grip surface at the tip & a cutting surface in the middle, it is a highly versatile tool that is often used in electrical work.
Due to the multi-tool function & jaw strength, it can also be used to bend, bend and cut metal which can be very difficult for other pliers. In some cases, insulated handles are able to protect the user from electric shock, although most models are not rated against shocks.
20. Locker Pliers
The several occasions in the past, I have mentioned how a simple pair of locking pliers can be a greats item in your toolboxes. But to my surprise, looking back, I see that these references are brief, and I have not paid full attention to the locking pliers they deserve.
Their name means locking pliers – pliers that lock into position, allowing them to hold objects tightly with remarkable strengths. The exact point at which pliers go from “open” to “lock” is adjustable, allowing you to lock them on objects of different sizes, such as nuts and bolts.
As the name itself suggests, these pliers are designed to lock the jaws in place, making them excellent for holding stripped screws and bolts. A wide variety of jaw sizes are available for this device, allowing you to choose a design that best suits your needs.
21. Nail Puller Pliers
Similar to tongs, the tips of its claws are tapered to allow them to dig under the head of the fingernails and take them out. Some variations also have a claw behind the right jaw to provide extra levitation.
22. Oil Filter Pliers
These odd-looking pliers have a C-shaped pair of toothed jaws, with one being longer than the other. They are used in the automotive industry to remove oil filter casings.
23. Piston Ring Pliers
There are two major designs of piston ring pliers, both of which are used to remove and replace the piston ring in the engine.
The first has simple curved tips on the jaws that can be used to stretch the piston ring for easy removal. The second has a large curved set of jaws with multiple braces to support the ring and reduce the risk of war.
24. Push Pin Pliers
The tips of these pliers are wedge-shaped so that they fall under the pin caps of the plastic anchors. Squeezing the pliers will push the pushpin out, allowing the anchors to be safely removed. The device is used in automotive work as well as other industries where push pin-style anchors are used.
25. Bail Making Pliers
The jaw of this device consists of two dowels, which are larger than each other. Primarily used in jewelry making, the wire is wrapped around the jaw to form clasps, ear wires, & many other shaped loop components.
26. Battery Pliers
Mainly used in the automotive industry for retaining bolts on car batteries and jumper cables, these pliers have small, angled jaws. The lower jaw is slightly shorter, & both jaws are thinkers to make it more durable.
27. Bent Nose Pliers
Variations of needles nose pliers consist of a set of jaws that are bent at an angle at the midpoint (usually 45 or 90 degrees).
This allows them to hold surfaces when multiple pliers are required, or it is very difficult to reach the angle with normal needle-nose pliers. They are useful in jewelry making; as a result, electricals work & other occupations that relate to wire shaping.
28. Brake Spring Pliers
Another useful automotive device, this pliers, is actually a multi-tool specifically designed to handle the springs found in drum brakes.
The tip of one jaw is rounded to remove the springs, while the other is rotated to hold the springs back inside. Sometimes, a handle also has a shaft to remove the shoe hold-down pin.
29. Canvas Pliers
The canvas players are made of chrome-plated steel. Fully mating teeth ensure positive no-slip grips. The handle has a built-in spring return that opens the pliers upon your release. 2 1/4 ″ wide cut on canvas.
An invaluable tool for artists, these wide-jaw pliers allow a person to do what normally takes two. Jaws are usually padded to avoid damaging canvas surfaces while it is being stretched over the frame.
30. Chain Nose Pliers
Featuring the stubby triangular jaw, the chain nose pliers are one of the many tools used in shaping wire and making jewelry. The design of the jaw allows the wire to bend, fold, and shape. When working with beads, the tip assists in closing or opening the bead tips and jump ring.
31. Combination Pliers
The jaws of these multi-purpose devices have three distinct segments. From the tip, the first parts are serrated gripping surfaces. A round serrated section behind it makes it easier for gripping tubes and other thick round objects.
Finally, there is a cutting surface in the proximal part of the base. Often mistaken for linesman’s pliers, the latter lacks a round center segment in the jaw.
32. Eyelet Pliers
An important component in the sewing, cobbling, and other clothing industries, eyelets allow the addition of laces and drawstrings to the fabric.
These holes have a ring and long hub that must bend downwards. Most modern eyelets pliers have interchangeable dies to allow for both punching and crimping, although some have only a crimping surface or a wheel in the upper jaw that has various die tips.
33. Fencing Pliers
This curious-looking multi-tool resembles a two-handled hammer when viewed from above. The notch in the fulcrum allows you to cut the strings of various gauges, while the staple in the left jawbone has a hammers surface for driving.
The rights jaw paws can be used to remove staples, & the jaw itself has a gripping surface and a round grip hole.
34. Flat Nose Pliers
The Mark of Professional Tools tool seeks to research and develop quality, energy-efficient flat nose pliers to benefit consumers.
As a leading supplier of flat-nose pliers, we provide professional flat nose pliers. The team of Professional Tools is second to none. Our knowledge, energy, and passion ensure that you get the best possible results for your customers.
If you have any questions about Flat Nose Pliers, contact The Mark of Professional Tools Support Team directly.
They will provide specifics bits of advice in choosing the systems that meet the technical specifications & approvals to provide the most cost-effective solution for you. The flat, tapered jaws of these pliers are used to hold and rotate the metal, as well as lead and wires.
It is a common device in both electrical and mechanical works. They can easily make sharp turns and right angles with wire and also work well for straightening. Available with a short or long nose.
FAQ on Pliers: Types, Uses, and Functions
What Are the Primary Uses of Pliers?
Pliers are primarily used for gripping, bending, cutting, and splicing wire. They can loosen or tighten bolts, hold objects for stabilization, remove fasteners, and cut wire or nails.
How Do Slip-Joint Pliers Differ from Other Types of Pliers?
Slip-joint pliers have a pivot point that allows the jaws to adjust for holding objects of different sizes. They are versatile and can handle various tasks, including plumbing and general repairs.
What Are Needle-Nose Pliers Used For?
Needle-nose pliers, also known as long-nosed pliers, are used for precise tasks such as bending wire, reaching into tight spaces, and handling small objects. They are commonly used in electrical work and jewelry making.
Can Pliers Cut Through Metal?
Yes, some pliers, like diagonal-cutting pliers and side-cutting pliers, are specifically designed to cut through metal wires and nails. They are also known as wire cutters.
What Are Lineman’s Pliers, and What Are They Used For?
Lineman’s pliers are heavy-duty pliers used by electricians to cut, bend, and twist wire and cable. They have a gripping surface at the tip, a cutting edge in the middle, and a flat surface for hammering.
What Are Crimping Pliers, and How Are They Used?
Crimping pliers are used to join two pieces of metal by deforming one or both to hold the other. They are essential for making wire connections and are commonly used in electrical work.
How Do Tongue-And-Groove Pliers Differ from Regular Pliers?
Tongue-and-groove pliers have adjustable jaws that allow them to grip a wide range of objects, including pipes and large nuts. They offer greater leverage due to their longer handles and angled jaws.
What Are the Different Types of Specialized Pliers?
Specialized pliers include crimping pliers, round nose pliers, running pliers, sheet metal pliers, split ring pliers, soft jaw pliers, spark plug pliers, welding pliers, wire twisting pliers, diagonal pliers, hose clamp pliers, needle nose pliers, slip joint pliers, snap ring pliers, and many more.
How Do You Choose the Right Pliers for a Specific Task?
Choose pliers based on the specific task you need to accomplish. For gripping small objects, use needle-nose pliers. For cutting wire, use diagonal-cutting pliers. For plumbing tasks, use slip-joint or tongue-and-groove pliers.
What Maintenance Is Required for Pliers?
Regularly clean and oil the pivot points of pliers to keep them in good working condition. Store them in a dry place to prevent rusting. Inspect the jaws and handles for any signs of wear or damage.
Can Pliers Be Used for Splicing Wires and Stripping Insulation?
Yes, lineman’s pliers and some other specialized pliers are equipped with features to splice wires and strip insulation. They are essential tools for electricians.
What Are the Safety Precautions When Using Pliers?
Always wear safety glasses to protect your eyes from flying debris. Use the right type of pliers for the job to avoid damage to the tool and injury. Keep your hands and the handles dry to prevent slipping.
What Are Soft Jaw Pliers Used For?
Soft jaw pliers have padded jaws to prevent scratching on delicate surfaces like chrome or other soft metals. They are often used in plumbing and for handling scuba diving equipment.
Are There Pliers Designed Specifically for Automotive Work?
Yes, there are several types of pliers designed for automotive work, including spark plug pliers, oil filter pliers, and brake spring pliers. Each type is tailored to specific tasks within automotive maintenance and repair.
What Are Welding Pliers, and What Tasks Can They Perform?
Welding pliers are multi-functional tools used in welding trades. They can remove spatter, grasp wire, cut, and even hammer. They are designed to handle various tasks related to welding.
How Do You Use Split Ring Pliers?
Split ring pliers have a special tip to open coiled rings. Insert the tip into the ring, squeeze the handles to separate the coils, and then thread the ring onto another object. They are commonly used in fishing tackle and keyrings.
What Is the Difference Between Eyelet Pliers and Grommet Pliers?
Eyelet pliers are used to insert eyelets into fabric for laces and drawstrings, typically in sewing. Grommet pliers perform a similar function but are designed for heavier-duty materials like tarps and tents, inserting larger and more durable grommets.
What Are Hose Clamp Pliers Used For?
Hose clamp pliers are designed to compress hose and spring clamps, making connections tight. They are commonly used in automotive repair to work on hoses and clamps in tight spaces.
Can Pliers Be Used for Jewelry Making?
Yes, several types of pliers are used in jewelry making, including round nose pliers, chain nose pliers, and bail making pliers. These tools help in shaping, bending, and creating loops in wire and metal.
What Are Locking Pliers, and How Do They Work?
Locking pliers, also known as Vise-Grips, have a locking mechanism that allows them to hold objects tightly in place. The jaws can be adjusted to lock onto objects of different sizes, providing a secure grip for various tasks.
